Physics of the Lathe :: physics lathe wood

How much timberland could a wood cast off chuck if a wood chuck could chuck wood? An time old natural language twister that has never been answered. In this rhyme, the universal assumption is that the woodchuck is a small furry groundhog like creature, scarce there is some other kind of wood chuck that is not as common but could chuck wood. Here we go out explore this path of answering this age old riddle.In the production of many wood products a common manufacturing tool known as a lathe is utilise, and to hold the wood in the lathe a chuck is utilize. In order to calculate the total of wood a wood chuck can chuck we must first of all define how the wood pull up stakes be chucked. When wood chucking the chuck will be spinning around the spindle and an attachment will be used that will act as a catcher that will be on the outer radius of the chuck. We will also be able to calculate the velocity of the wood leaving the chuck and the kinetic energy.Lathes & ChucksA LATH E is a machine tool designed primarily to do turning, facing, and boring. Their versatility permits multiple operations to be done with a single setup of the workpiece. Consequently, the lathe is the most common machine tool. The lathe used to theoretically calculate the amount of wood that can be chucked is the TECHNO CNC WOOD LATHE. This lathe has a spindle hotfoot rate from 500 to 2000 RPM, which will be used to calculate the amount of wood chucked.The Chuck is an attachment that is the most commonly used trend to hold a workpiece on the lathe. It attaches to the spindle on the lathe and is spun by it at speeds up to 4000 RPM depending on the lathe. The chuck that will be used for our calculations will have an approximate mass of 4 kilograms and a diameter of 6 inches.Wood ChuckingTo calculate the amount of wood that is chucked, and the other properties of wood chucking, using the TECHNO CNC WOOD LATHE the following values and assumptions will be used * The spindle speed o f the lathe has a range of 500-2000 RPM * The diameter of the chuck is 6 in. approximately 15 cm. * A one kilogram immobilise of wood made out of American Spruce with a tightfistedness of .